Hot Water (Ded/Dedpid); How To Set The Boiler's Temperature By Means Of The Pid; Outine Maintenance And Precautions - La Pavoni DOMUS BAR - DOMUS BAR DOSATA Gebrauchsanweisung

English
11.6 HOT WATER (MACCHINA DOMUS BAR)
a. Make sure to follow the instructions as per 11.1 " starting of the machine".
b. Open the knob (4) and push the coffee/ hot water lever and the steam lever on the position "I"; the turbo
steam lever (6) pour out immediately.
c. Fill the cup with the desired water and push the coffee/ hot water lever (14) and the steam lever (15) on the
position "0" and close the knob (4).
d. After filling the cup, make sure that there is still water in the tank (1).
11.6.1 HOT WATER (DOMUS BAR ELETTRONICA DOSATA - BOMUS BAR TERMOPID DOSATA)
a. Make sure to follow the instructions as per 11.1 " starting of the machine".
b. Open the knob (4) and press the switch (25)"; the turbo steam nozzle (6) pour out immediately.
c. Once you've got the desired quantity of water, release the switch (25) to stop hot water coming out and
turn the knob (4).
d. After getting hot water from the nozzle, always check that there's still water in the water tank.
Attention: water temperature is around 90-95°, be careful not to burn yourself.

12. HOW TO SET THE BOILER'S TEMPERATURE BY MEANS OF THE PID

The PID has been set by the producer of this machine on a temperature of 95°C. In order to change the
temperature please proceed as follows:
• press the button
• as soon as the display shows the boiler's temperature, help yourself with the buttons
in order to set the desired temperature, starting from a min. of 80C° up to a max. of 133C°.
• after 3 sec. from pressing the last button, the inserted temperature is memorized and the display shows the
set temperature.
NB: if the temperature is set too high, once a coffee request is made, the display starts to flash.
13. ROUTINE MAINTENANCE AND PRECAUTIONS
a. Attention: before pushing the coffee/ hot water lever (14), make sure that the machine is not releasing steam
(steam lever (15) on "I"), because when steam lamp (15a) is on, the water temperature in the tank is high –
danger of scalds.
b. It is recommended to clean the tank periodically by pulling it out carefully by its proper handle and by putting
the water tubes into it again being careful not to bend them.
c. Clean up the steam tube and the frothing spout regularly. The spout can be removed by pulling it down.
d. Use a normal damp cloth to clean both the spout and the pipe.
e. Do not leave the machine outdoor.
f. Do not immerse the machine in water.
g. Use the machine only under adult control and keep away from children.
Attention: damages due to the emptiness of the machine water circuit voids warranty; it
recommended to read the instruction booklet carefully and to control the tank (1) water level
regularly.
; as soon as the display shows the writing "PRG" press the button
30
;
and