RTW TM3-Primus Bedienungsanleitung Seite 130

Switch to Vertical Display Mode
1. During normal operation wipe across the touchscreen with your fi nger
in vertical direction of the lying unit. The display changes from horizon-
tal to vertical orientation.
2. Place the display unit in its upright position again.
NOTE - Please note that the TM3-Primus recognizes the wipe
orientation (lengthwise or crosswise) in order to switch between vertical
and horizontal display modes. It doesn't use a motion sensor for this.
EN-32 3 | Operation | 3.4 | Loading vertical and horizontal Presets
Manual | TM3-Primus