Ensure Safety - WAGNER PLAST COAT HP 30 Originalbetriebsanleitung

Plast Coat HP 30
Translation of the original operating instructions
Never bring fingers, hands or other body parts into contact with the spray jet!
1
Never point the spray gun at yourself, other persons or animals.
Never use the spray gun without spray jet safety guard.
Do not treat a spray injury as a harmless cut. In case of injury to the skin by coating material
or solvents, consult a doctor for quick and correct treatment. Inform the doctor about the
coating material or solvent used.
The following points are to be observed in accordance with the operating manual
2
before every start-up:
1. Faulty units may not be used.
2. Secure a Wagner spray gun.
3. Ensure earthing.
4. Check the permissible operating pressure of the high-pressure hose and spray gun.
5. Check all the connecting parts for leaks.
Instructions for regular cleaning and maintenance of the unit are to be observed
3
strictly.
Observe the following rules before any work on the unit and at every working break:
1. Relieve the pressure from the spray gun and high-pressure hose.
2. Secure a Wagner spray gun.
3. Switch the unit off.
WARNING!
Attention, danger of injury by injection!
Unit develops extremely high spray pressures.

Ensure safety!

GB
25