Switching On The Workstation - MAXDATA FUSION 1000 Benutzerhandbuch

Switching on the Workstation

You should switch on the monitor, printer, modem, etc. before you switch on the workstation.
This ensures that the operating system recognizes the connected devices and integrates
them accordingly.
Switch the power adapter switch from "0" to "1" .
Press the on/off button on the front of the workstation.
The workstation carries out an internal self-test. If errors are detected during this test, these
are displayed on the screen if possible.
After successful completion of the workstation self-test, the operating system (if installed)
is started.
MAXDATA Workstation FUSION 1000
UK
77