Connecting A Printer - MAXDATA FUSION 1000 Benutzerhandbuch

Connecting a Printer

Printers are normally distinguished by two different types of connection: parallel or USB
interfaces. Many printers feature both options. It is recommended to connect the printer
to the parallel interface. This retains your USB connection which you can use for a range
of other devices.
When connecting the printer to the parallel port of the workstation, both devices must be
switched off.
The printer is connected to the workstation by a printer cable (not included).
The parallel printer interface has 25 pins and is located on the back of your workstation. It
is marked accordingly.
Connect the printer cable to the parallel port of your workstation (see illustration). Plug the
other end of the cable into the port of your printer.

If your printer has a USB plug, it is essential to read the operating
instructions BEFORE connection. For example, you will often have to
install the driver first. Note that before you use the printer for the first
time, you must remove the transport protection and insert the ink or
toner cartridge. See the user guide for the printer for further informa-
tion. Frequently, you must also install the appropriate printer driver.
You can find the necessary information in the printer user guides.
MAXDATA Workstation FUSION 1000
UK
75