Sony DXC-950P Gebrauchsanweisung Seite 50

Shooting
3
Display the camera image on the screen.
Notes
• If the color bar signal is displayed on the screen, press
the BARS button to make it disappear.
• If the menu is displayed on the screen, press the
MENU button to make it disappear.
4
Set the lens iris control as follows:
• Set to auto-iris control when using a lens with auto-
iris capability.
• Set to an appropriate iris opening value when using a
manual-iris lens.
5
Place a white object in the same light as that falling on
the subject to be shot, then zoom in on the object to fill
the screen as follows:
35% of screen height
15% of
screen
width
10% of screen height
The white object can be a piece of white paper or cloth,
a white wall, or the like.
50
The white object
must fill a rectangle
15% of
of this size. (Avoid
screen
very bright highlights
width
within the rectangle.)
Notes
• Be careful not to include highly reflective items in the
picture.
• Always shoot the image under suitable lighting
conditions.
6
Press the WHITE button for one second.
The message "AWB" appears on the screen while the
white level is being adjusted. When the adjustment is
done, the message "AWB OK" flashes on the screen.
The adjusted white level is automatically stored in
memory where it remains for at least 10 years, even if
the camera's power is turned off.
White balance adjustment errors
If the white balance adjustment is not successful, an error
message appears on the screen for about one second. If this
happens, take the necessary measures and conduct steps 1
through 6 again.
For more details, see "Error messages" on page 51.
AWB NG
Error message