Rear Panel; Pin Assignment - Sony DXC-950P Gebrauchsanweisung

Rear Panel

1
VIDEO OUT connector
2
RGB/SYNC connector
3
FLASH connector
4 BARS button
5 MENU button
6 FUNCTION UP/DOWN buttons
MENU FUNCTION DATA
FLASH
BARS
RGB/SYNC
VIDEO OUT
DC IN/
REMOTE
!£
DC IN/ REMOTE connector
Note
Before connecting video equipment, see "Important safeguards/
notices for use in the medical environments" on page 5.
7 DATA DOWN/
button
8 DATA UP/
WHITE button
UP LENS
WHITE 9 LENS
DOWN
connector
CCU
0 CCU
connector
REMOTE
GEN LOCK
!¡ GEN LOCK
connector
!™
REMOTE connector
1
VIDEO OUT (output) connector (BNC-type)
Outputs (composite) video signals from the camera module.
2
RGB/SYNC (RGB/sync signal output)
connector (D-sub 9-pin)
Outputs RGB signals and their respective sync signals. Use
a CCXC-9DB/CCXC-9DD/CCMC-9DS cable for the
connections.

Pin assignment

Pin No. Signal
1 GND
2 GND
3 RED (R-Y) output
4 GREEN (Y) output
5 BLUE (B-Y) output
Pin No. Signal
6 VBS (Y) output
7 SYNC/WEN output
8 GND
9 NC (C output)
15