Operation As A Pc Monitor; Connecting A Pc; Selecting Presets For The Pc; Settings For Pc Mode - Grundig 26 VLE 8200 SL Bedienungsanleitung

OPERATION AS A PC MONITOR

Connecting a PC

1 Connect the »PC-IN« socket on the television
to the corresponding socket on the PC using
a VGA cable (video signal).
2
Connect the »Audio« socket on the televi-
sion to the corresponding socket on the PC
using a suitable cable (audio signal).
Note:
Adjust your PC to the monitor (for example,
7
picture resolution 1280 x 768, picture fre-
quency 60 Hz).

Selecting presets for the PC

1
Press » « and use »
to select the preset »PC« and press »OK« to
confirm.

Settings for PC mode

1 Open the menu with »MENU«.
2
Select the »SOURCE SETUP« menu item with
» « or » « and press »OK« to confirm.
V Λ
– The »SOURCE SETUP« menu appears.
3 Select the function or setting with »
» «, and then use »
Λ
implement it.
64
ENGLISH
< >
«, » «, » « or »
V Λ
« or
V
< >
«, » « or » «, » « to
V Λ
----------------------------------------------------------
Source
Auto Ajust
Extended settings
Auto Ajust Mode
Position
Size
Phase
«
Options:
– »Auto Ajust« for automatic PC configura-
tion.
– »Auto Ajust Mode«, select the option
»On« if the configuration should be imple-
mented automatically in PC mode.
– »Position« to configure the horizontal and
vertical picture position.
– »Size« to set the cycle frequency.
– »Phase« to eliminate flicker, unfocused
pictures or horizontal interference.
4 Press »MENU« to end the setting.
SOURCE SETUP
PC
On
50H -­ 50V
0
30
Exit
Back
20.09.2010
15:46