Grundig 26 VLE 8200 SL Bedienungsanleitung Seite 33

SMART INTER@CTIVE TV AND HOME NETWORK
Manual connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can ob-
tain your »IP Address«, »Netmask«, »Gateway«
and »DNS« values from your Internet Service
Provider (ISP).
1
Open the menu with »MENU«.
2
Select the line »INTER@CTIVE TV« with »
or » « and press »OK« to confirm.
Λ
– The »INTER@CTIVE TV« menu appears.
3 Select »Connection Type« with »
and then select »Wireless« with »
4
Select »Select Access Point« with »
» « and confirm with »OK«.
Λ
– »Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu
5 Select the network that you want to connect
<
with » «, » «, »
V Λ
»OK«.
– Wireless connection password screen is
displayed.
6
Select the required character with »
< >
» « and » « and move to the next character
with »OK«.
– Select »ABC« for uppercase and »abc«
for lower case and confirm with »OK«.
– Select »?@123« for numbers and symbols
and confirm with »OK«.
– Enter the password, select »Confirm« with
<
» «, » «, » « or »
V Λ
»OK«.
Notes:
In WEP encryption system, more than one
7
network password can be assigned for the
network. Your television can only connect to
network with level 1 password.
For TV to discover the wireless modem on
7
the network, the network name should
support ASCII characters.
« or »
V
<
« or »
« or
V
>
« or » « and confirm with
«, »
V
>
« and confirm with
7 Select »Network Configuration« with »
» « and then select »Manual« with »
Λ
>
» «. »IP Address«, »Netmask«, »Gateway«
and »DNS« options are active.
8
Select »IP Address« with »
Enter the IP address with »1...0« and press
» « (green) to save the value.
9
Select »DNS« with »
Enter the DNS address with »1...0« and press
» « (green) to save the value.
«
V
10 Select »Netmask« with »
Enter the Netmask with »1...0« and press
» « (green) to save the value.
«
Λ
>
«.
11
Select »Gateway« with »
Enter the Gateway with »1...0« and press
» « (green) to save the value.
12 Start the registration to the home network by
pressing » « (red).
– The mesage »Connecting ... Please Wait«
appears.
13
Press » « (green) to make sure that the
network connection is established with the
current settings.
– The messages »Testing ... Please Wait«
«,
appears, after successfull announcement
Λ
the messages »Connecting To Gateway:
Success«
Success«.
14 Press »MENU« to end the setting.
« and press »OK«.
V
« and press »OK«.
V
« and press »OK«.
V
« and press »OK«.
V
and »Internet Connection:
ENGLISH
« or
V
<
« or
33