Manual Connection - Grundig 26 VLE 8200 SL Bedienungsanleitung

SMART INTER@CTIVE TV AND HOME NETWORK

Manual connection

Certain networks require Static IP address. If your
network requires a Static IP address, you must
enter the »IP Address«, »Netmask«, »Gateway«
and »DNS« values manually. You can obtain
your »IP Address«, »Netmask«, »Gateway«
and »DNS« values from your Internet Service
Provider (ISP).
1
Open the menu with »MENU«.
2
Select the line »INTER@CTIVE TV« with »
or » « and press »OK« to confirm.
Λ
– The »INTER@CTIVE TV« menu appears.
3 Select »Connection Type« with »
and then select »Wired« with »
4
Select »Network Configuration« with »
» « and then select »Manual« with »
Λ
>
» «.
– »IP Address«, »Netmask«, »Gateway« and
»DNS« options are active.
INTER@CTIVE TV
inter@ctive Applications
Network Settings
Connection Type
Network Configuration
IP Address
DNS
Netmask
Gateway
MAC Address
Exit
Back
5 Select »IP Address« with »
Enter the IP address with »1...0« and press
» « (green) to save the value.
6
Select »DNS« with »
Enter the DNS address with »1...0« and press
» « (green) to save the value.
30
ENGLISH
«
V
« or » «
V Λ
< >
« or » «.
« or
V
<
« or
dd.mm.yyyy
hh:mm
OK
Wired
Manual
10.134.151.15
10.134.150.8
255.255.255.0
10.134.151.254
E1:DF:BF:92:00:11
Connect
Test Connection
« and press »OK«.
V
« and press »OK«.
V
7 Select »Netmask« with »
Enter the Netmask with »1...0« and press
» « (green) to save the value.
8 Select »Gateway« with »
Enter the Gateway with »1...0« and press
» « (green) to save the value.
9
Start the registration to the home network by
pressing » « (red).
– The mesage »Connecting ... Please Wait«
appears.
10 Press » « (green) to make sure that the
network connection is established with the
current settings.
– The messages »Testing ... Please Wait«
appears, after successfull announcement
the messages »Connecting To Gateway:
Success« and
Success«.
11 Press »MENU« to end the setting.
« and press »OK«.
V
« and press »OK«.
V
»Internet Connection: