Power Supply Specifications - Star SP298 SERIES Bedienungsanleitung

Power Supply Specifications
Power Supply
AC Adaptor
Input
Output
Plug
Consumption Current
Operating
(approximate averages)
Stand-by
(approximate averages)
Important!
• When using a printer power supply other than the optional AC adaptor (PS48-
24A), be sure that the following cautions are observed.
• Use a power supply of DC 24 V ± 5% and more than 2.0 A.
• Be careful about installing the printer in an area where there is noise. Take the
appropriate measures to protect against electrostatic AC line noise, etc.
• The optional cable set can be connected.
PS48-24A, switching type
90 to 264V AC, 50/60Hz
24V DC ± 5%, 2.0A
3-pin POWER JACK TCP 8927 (Hoshiden brand or equivalent.)
Conditions: 24V, excluding external equipment driving
Continuous ASCII printing + paper feed: 0.6A
Solid block printing + paper feed: 1.0A
Solid block printing: 1.9A
Peak (solid printing): 3.1A
Paper release deactivated: 0.24 A
Paper release activated: 0.07A
124