Power Supply Specifications - Star SCP700 Serie Bedienungsanleitung

152
Storage Environment
Temperature
Humidity
Power Supply Specifications
Power Supply
AC Adaptor
Input
Output
Plug
Power Consumption
Important!
When using a printer power supply other than the optional AC adaptor
(PS48-24A), be sure that the following cautions are observed.
Use a power supply of DC 24 V ± 5% and more than 2.0 A.
Be careful about installing the printer in an area where there is noise. Take
the appropriate measures to protect against electrostatic AC line noise, etc.
The optional cable set can be connected.
-4°F to 140°F (-20°C to 60°C)
10% to 90% (non-condensing)
PS48-24A, switching type
90 to 264V AC, 50/60Hz
24V DC ±5%, 2.0A
3-pin POWER JACK TCP 8927 (Hoshiden brand or equivalent.)
55W maximum; 20W average (during continuous printing of ASCII characters)
15
Optional customer
display
180
(Unit : mm)