Your Machine; Description; Technical Characteristics - WAGNER PlastCoat HP 10 Originalbetriebsanleitung

PlastCoat HP 10

3. YOUR MACHINE

3.1. DESCRIPTION

PlastCoat HP 10 is a machine for applying thin films of filler.
It uses a valveless pump, is easy to maintain, with a round stainless steel tank for easy cleaning, a Ø35mm
drain plug. It is equipped with large diameter, flat profile, inflatable tyres for better stability.
The PlastCoat HP 10 can atomise various types of plaster: smoothing plaster, skimming plaster,
droplet filler, etc.
Do not use products with grain size (unless with droplet kit up to 3mm of grain size), mortars,
lime based renders, technical or special coatings with heavy loadings.

3.2. TECHNICAL CHARACTERISTICS

Maximum working pressure
Maximum product flow-rate (water)
Electric motor
Fusing
Pump
Degree of protection
Tank capacity
Maximum nozzle size
Dimensions
Weight
Max. tyre pressure
Noise level
Delivered with:
230 V version
120 bar (12 MPa)
2.2 kW / 230V / 50 Hz, 60 Hz 2.2 kW / 110 V / 50 Hz, 60 Hz
16 A time-lag
volumetric screw (high-pressure)
- 1 Ø19 x 10m hose
- 1 Ø13 x 2,5m easy handling flexible hose
- 1 spray-gun
- 1 TT3 nozzle
- 1 nozzle carrier
110 V version
6 L/min
32 A time-lag
IP 54
40 l
0.045"
113 x 61 x 78 cm
90 kg
2.0 bar
91 Lwa
- 1 Cleaning ball
- 1 Cleaning agent
GB
31