Initial Operation - Parkside PHPA 4 A1 Originalbetriebsanleitung

Initial operation

Inserting a glue stick:
♦ Push the glue stick
♦ Allow the appliance heat up for about 60 seconds. The appliance is
now ready for use.
Switching on:
♦ To turn on the cordless hot glue gun, press the ON/OFF switch
until the temperature indicator
tery level display
■ The temperature indicator
appliance has reached working temperature.
Switching off:
♦ To turn off the cordless hot glue gun, press the ON/OFF switch
until the temperature indicator
♦ After use, place the cordless hot glue gun down carefully and
allow it to cool down fully before you store the appliance. The
hot nozzle
Automatic switch off:
NOTE
► The cordless hot glue gun switches itself off after 10 minutes
to save energy.
–
Switch the cordless hot glue gun back on and check the
temperature indicator
to see whether the appliance needs to be recharged or
heated further.
► To save energy, do not switch the cordless hot glue gun on
unless you plan to use it.
│ GB │ IE
■ 30
into the feeder shaft
lights up green/red. The glue is heated up.
lights up green as soon as the
can cause damage and/or burns.
and the battery level display
.
lights up red and the bat-
goes off.
PHPA 4 A1