Declaration Of Conformity; Maintenance; Environmental Protection - Worx WG155E Originalbetriebsanleitung

TO FIT SPOOL AND LINE COMPLETE:
Remove old spool.
Place new spool into cap with cut out areas of
the spool in line with eyelet.
Release line from cleat and feed line through
eyelet.
Refit the cap.
TO FIT NyLON LINE ONLy:
wArNINg! Take approximately 3m
of line. Insert 15mm of line into the
spool holes and wind line in the direction
of the arrows on the top of the spool.
your Trimmer is designed to use only line
with a Maximum diameter of 1.65mm"
IMPOrTANT: Leave approximately 4"
(100mm) of line unwound and place into cleat.
Care should be taken to ensure that the line is
neatly coiled on the spool. Failure to do so will
impair the efficiency of the automatic line feed.
Then fit spool as described in "To fit spool
and line complete".

MAINTENANCE

After use, disconnect the battery from
the mains and check for damage.
Your power tool requires no additional
lubrication or maintenance. There are no user
serviceable parts in your power tool. Never
use water or chemical cleaners to clean your
power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place.
Keep the motor ventilation slots clean. Keep
all working controls free of dust.
ENVIRONMENTAL
PROTECTION
This product has been marked with a
symbol relating to removing electric
and electronic waste. This means that
this product shall not be discarded with
household waste but that it shall be returned
to a collection system which conforms to the
European Directive 2002/96/CE. It will then
be recycled or dismantled in order to reduce
the impact on the environment. Electric and
electronic equipment can be hazardous for the
environment and for human health since they
contain hazardous substances.
Cordless Lawn Trimmer/Lawn Edge Trimmer EN
DECLARATION OF
CONFORMITy
We,
PoSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description wOrx Cordless Lawn
Trimmer/Lawn Edge Trimmer
Type wg155E (130-169-designation of
machinery, representative of Cordless
grass Trimmer)
Function Cutting grass and weeds
Complies with the following Directives,
Machinery Directive
Electromagnetic Compatibility Directive
2004/108/EC
2011/65/Eu
RoHS Directive
Noise Emission in the Environment by
Equipment for Use outdoors Directive
2000/14/EC amended by 2005/88/EC.
- Conformity Assessment Procedure as per
Annex VI
- Measured Sound Power Level 90.6dB(A)
- Declared Guaranteed Sound Power Level
94dB(A)
-The notified body involved
Name: Intertek Testing & Certification Ltd
Address: Davy Avenue, Knowlhill, Milton
Keynes, MK5 8NL
Standards conform to:
EN 60745-1
EN 55014-2
EN ISO 3744
The person authorized to compile the
technical file,
Name: russell Nicholson
Address: Positec Power Tools (Europe)
Ltd, PO Box 152,Leeds,LS10 9DS,uK
2013/02/25
Leo Yue
PoSITEC Quality Manager
2006/42/EC
EN 55014-1
EN 786
15 15