Herunterladen Inhalt Inhalt Diese Seite drucken

Oven Function; Setting The Time - ECG MTD 251 PBS Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Always ensure the following:
1. Always check that there is a suffi cient amount of water in the tank. If the water level in the tank
goes below the MIN mark during steam heating a warning sound will be emitted, "E-2" will be
displayed and the oven will stop. Remove the water tank, fi ll up the water and insert back into
place. Restart the cooking by pressing the Start/+30Sec./Confi rm button.
2. If you will not be using the steam heating function for a longer period of time, empty the water
from the tank.
3. Use fi ltered or distilled water.
4. Clean the water drip tray regularly.
5. While steam cooking, drops may form on the oven or the doors. Wipe the water off with a wiping
cloth.
6. Be careful when opening the door. There is a danger of burns from the steam.
7. If the water tank is full, do not remove it, the water would fl ow back.

OVEN FUNCTION

Operating instructions
This microwave oven uses modern electronic controls to set cooking parameters so that they better
correspond to your requirements.

1. Setting the time

As soon as the oven is connected to a power socket,"0:00" will appear on the display and a beep will
be sounded.
1) Press the Stop/Clear/Clock button, the hour digits will start to fl ash.
2) Using
set the hours in the range 0-23 and confi rm by pressing the Start/+30Sec./Confi rm
button.
3) Using
set the minutes in the range 0-59 and confi rm by pressing the Start/+30Sec./Con-
fi rm button. „:" will fl ash on the display.
Note:
If you do not set the time, the oven will not work after being turned on.
While setting the time you can press the Stop/Clear/Clock button, the oven will automatically switch
back to the previous state.
2. Cooking in a microwave oven
Press the Microwave/Grill/Combi button, "P100" will appear on the display. By repeatedly pressing
Microwave/Grill/Combi or using
30", „P 10", „G"... "C-2" (see table below) will appear on the display in sequence.
By pressing the Start/+30Sec./Confi rm button confi rm and using
in the range 0:05 - 95:00. Confi rm by pressing the Start/+30Sec./Confi rm button, at the same time
cooking will be started.
67
select the desired power output. „P100", „P 80", „P 50", „P
EN
set the desired cooking time

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis