Lenze EPM-H510 Anleitung Seite 17

Show/Hide Bookmarks
For commissioning, the system bus must be completely wired.
é
Check the supply voltage before switching on the unit.
é
Check the wiring for completeness and short circuit,
Check whether the bus system is terminated physically at the first and last
participant.
Initial switch on of the keypad and loading of a project
1. Switch on the PC and start the tool HMI
Designer.
2. Switch on the supply voltage for the
keypad.
The unit is initialized.
3. Select system page.
é
For this, touch the display in the
0
top right
é
or
2
top left and bottom right
corner.
The corner to be touched first must not
contain a field for a selctable object.
The system page appears.
4. 4. Touch the field "TRAN PAGE"
The transfer page appears.
If "***WAITING FOR DOWNLOAD***" is
displayed, the keypad is ready for
receiving data from the PC.
5. Load the project needed from the HMI
Designer to the keypad.
&
"HMI Designer - First steps"
After the download, the keypad is ready for operation and can exchange data with other
participants through the system bus.
Switch off the supply voltage for keypad and PC before you remove the download cable
EPZ-H110.
Commissioning
1
and bottom left
3
4
.
2 2 2 2 2 2 2 2 2
Polo - Tapia Polo - Tapia Polo - Tapia Polo - Tapia Polo - Tapia Polo - Tapia Polo - Tapia Polo - Tapia Polo - Tapia
mecanismos mecanismos mecanismos mecanismos mecanismos mecanismos mecanismos mecanismos mecanismos
1 1 1 1 1 1 1 1 1
30/05/2000 30/05/2000 30/05/2000 30/05/2000 30/05/2000 30/05/2000 30/05/2000 30/05/2000 30/05/2000
Port Port Port Port Port Port Port Port Port : Network Port : Network Port : Network Port : Network Port : Network Port : Network Port : Network Port : Network Port : Network Port
Driver Driver Driver Driver Driver Driver Driver Driver Driver : CAN Master : CAN Master : CAN Master : CAN Master : CAN Master : CAN Master : CAN Master : CAN Master : CAN Master
Ver Ver Ver Ver Ver Ver Ver Ver Ver : 1.00 : 1.00 : 1.00 : 1.00 : 1.00 : 1.00 : 1.00 : 1.00 : 1.00
Addr Addr Addr Addr Addr Addr Addr Addr Addr : NO ADDR : NO ADDR : NO ADDR : NO ADDR : NO ADDR : NO ADDR : NO ADDR : NO ADDR : NO ADDR
Error Error Error Error Error Error Error Error Error : PR ERR : PR ERR : PR ERR : PR ERR : PR ERR : PR ERR : PR ERR : PR ERR : PR ERR
H510 TRANSFER PAGE H510 TRANSFER PAGE H510 TRANSFER PAGE H510 TRANSFER PAGE H510 TRANSFER PAGE H510 TRANSFER PAGE H510 TRANSFER PAGE H510 TRANSFER PAGE H510 TRANSFER PAGE
Graphic controller BOOT check Graphic controller BOOT check Graphic controller BOOT check Graphic controller BOOT check Graphic controller BOOT check Graphic controller BOOT check Graphic controller BOOT check Graphic controller BOOT check Graphic controller BOOT check
Graphic controller RAM check Graphic controller RAM check Graphic controller RAM check Graphic controller RAM check Graphic controller RAM check Graphic controller RAM check Graphic controller RAM check Graphic controller RAM check Graphic controller RAM check
*** WAITING FOR DOWNLOAD *** *** WAITING FOR DOWNLOAD *** *** WAITING FOR DOWNLOAD *** *** WAITING FOR DOWNLOAD *** *** WAITING FOR DOWNLOAD *** *** WAITING FOR DOWNLOAD *** *** WAITING FOR DOWNLOAD *** *** WAITING FOR DOWNLOAD *** *** WAITING FOR DOWNLOAD ***
- 8 -
0 0 0 0 0 0 0 0 0
3 3 3 3 3 3 3 3 3
03:42:36p 03:42:36p 03:42:36p 03:42:36p 03:42:36p 03:42:36p 03:42:36p 03:42:36p 03:42:36p
PROG PROG PROG PROG PROG PROG PROG PROG PROG
4 4 4 4 4 4 4 4 4
TRAN TRAN TRAN TRAN TRAN TRAN TRAN TRAN TRAN
PAGE PAGE PAGE PAGE PAGE PAGE PAGE PAGE PAGE
ESC ESC ESC ESC ESC ESC ESC ESC ESC
: OK : OK : OK : OK : OK : OK : OK : OK : OK
: OK : OK : OK : OK : OK : OK : OK : OK : OK
510_07
MA H510