Conrad Electronic VC - 200 Green DMM Anleitung Seite 4

3. Description of the Operation Elements
1
2
3
4
7
7
6
5
8
9
+ -
10
1. Power ON/OFF switch
2. Rotary Function Switch
3. mA-input
At this terminal AC and DC can be measured to max. 200 mA
4. A-input socket to measure DC- and AC-currents to 20 A max.
5. COM (-) input socket (COM- or negative terminal)
6. V-Ohm (+) input socket (= positive terminal)
7. LC-Display (3 1/2 digit, highest display value: 1999) with solar cell
(below)
8. Overload - Sign
If "1! or "-1" is displayed this means overflow = exceeding of
range
Attention!
Do not exceed the maximum input limits.
9. "-" minus sign or symbol for negative polarity
10. = battery symbol
- +
If this sign is displayed it is time to charge the High-Cap
8