Crisping Bread Rolls; Crumb Tray; Cleaning - Silvercrest SLTG 1100 A1 Bedienungsanleitung

Crisping bread rolls

Never place bread rolls directly on the toaster, always use the bread roll rack
1) Flip out the two feet of the bread roll rack
you have not already done so).
2) Place the bread roll rack
the toasting slot.
3) Place the bread rolls onto the rack and start the toasting procedure.
Turn the browning control
4) The browning can, however, vary, depending on the composition and type
of bread roll.
NOTE
► After toasting, the rolls will be very hot.
5) As soon as the toaster switches itself off, turn the rolls over to crisp the other
side and then switch the toaster back on.
6) When you are finished with the bread roll rack
saving storage.
–
Wait until the bread roll rack
–
Remove it from the appliance and fold in the feet by pushing them
together a little and folding them in at the same time.

Crumb tray

Crumbs that fall from the bread during toasting are collected in the crumb tray
1) To empty crumbs from the crumb tray
2) Tip out the crumbs.
3) Push the crumb tray

Cleaning

RISK OF ELECTRIC SHOCK
► Disconnect the plug from the mains power socket before cleaning the
appliance.
■ 42
│ GB│MT
back into the toaster so that it clicks back into place.
Never immerse the appliance in water or other liquids!
Otherwise there is a risk of an electric shock.
so that they click into place (if
onto the toasting slot so that the feet project into
up to a maximum of level 5
, you can fold it for space-
has cooled down.
, simply pull it out.
.
.
.
SLTG 1100 A1