Herunterladen Inhalt Inhalt Diese Seite drucken

Before You Start - Silvercrest SFB 10.1 C3 Bedienungsanleitung Und Serviceinformationen

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

SilverCrest SFB 10.1 C3
Repairs are required if the remote control has been damaged in any way,
for example if the device housing is damaged, when liquids or objects
have penetrated into the remote control or when the product has been
exposed to rain or moisture. Repairs are also necessary if the product
does not perform normally or if it has been dropped. All repairs must be
carried out by qualified service personnel. Never open the housing of the
remote control. Only use a clean, dry cloth for cleaning the remote
control. Never use any corrosive liquids. Do not attempt to open the
remote control housing, this would void your warranty.
Operating environment
The device is not designed for use in environments with
high temperatures or humidity (e.g. bathrooms) or those
with above-average levels of dust. Operating temperature
and operating humidity: 5°C to 35°C, max. 85 % RH.
Inserting the batteries
The programmed codes and the language settings are
stored permanently and are not lost if you change the
batteries. The date and time are lost.
Open the battery compartment on the
back of the remote control by removing
the battery compartment cover in the
direction shown. Insert the batteries with
the correct polarity, as shown in the
diagram. The correct polarity is labelled
on the batteries and inside the battery
compartment.
compartment cover. If the devices fail to
respond to the remote control, replace the
batteries with new batteries of the same
type. The device does not give any
indication when the batteries are running
low.

Before you start

The remote control is powered by 2 batteries of type Micro AAA, LR03,
1.5V. They are included in the package.
On delivery, the batteries are already
inserted into the battery compartment.
You just need to remove the plastic
film that is inserted between the
batteries and the battery contacts.
The procedure is as follows:
1. Open the battery compartment.
2. Remove the plastic film.
72 - English
Maintenance / cleaning
Close
the
battery

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis