Care And Maintenance - Exibel BX320 Bedienungsanleitung

• Another quick press of the mode selection button will return the speaker to
Bluetooth mode; it can take a few seconds for Bluetooth to activate.
• Hold in the [ Volume/standby/mode ] button for 3 seconds to put the speaker in
standby mode.
• Once in standby mode, hold in the [ Volume/standby/mode ] button for 3 seconds
in order to turn on the speaker in Bluetooth mode.
Connecting an external Bluetooth device
1. Plug the mains adaptor into a wall outlet. The LED indicator will flash blue to
show that the speaker is in Bluetooth mode. Alternatively, Bluetooth mode can be
selected as described above.
2. Activate Bluetooth on the device to be paired with the speaker.
3. The speaker will appear on your device as "BX320", select it and pair it with your
device. Refer to the instruction manual of your device for further clarification if you
are unsure.
4. Once connection has been established the LED indicator on the speaker will shine
a steady blue.
5. Start playback on your device. Set the desired volume levels both on your external
device and the speaker. Control other playback settings from the external device.
Note: If you are prompted to enter a PIN code on your device, you should enter
0000 (four zeroes). Certain devices may also require you to approve the connection.
If you have connected a mobile phone to the speaker via Bluetooth and receive
a call whilst you are listening to music, the music will be switched off automatically.
Once the call has been ended, music playback will be resumed (if your phone settings
enable this).
Playback from external devices connected to the audio inputs
1. Connect the devices as described in Connections above.
2. Activate the audio inputs as described in Switch on, standby and mode selection
mode above. Note: If external devices are connected to both input 3 and 4,
playback will only be possible via input 3. If you wish to play content from
the external device connected to input 4, you will need to disconnect any cable
plugged into input 3.
3. Start playback on the device. Set the desired volume levels both on your external
device and the speaker. Control other playback settings from the external device.

Care and maintenance

• Unplug the mains adaptor if the speaker is not to be used for an extended period.
• Before cleaning the speaker, unplug the mains adaptor and wipe the speaker with
a damp cloth. Use only mild cleaning agents, never solvents or corrosive chemicals.
5