Teka TZ 3210 Einbauanleitung Seite 38

GB
Heat-up function
(Automatic start of cooking)
This function will help you when cooking,
since it is not necessary to be there at the
same time. The touch control panel pre-pro-
grammes the chosen hotplate to the maxi-
mum power level and then lowers it to the
desired power level, chosen by you, after a
certain amount of time. (See table 1).
Table 1
Level
selected
1
2
3
4
5
6
7
8
HEAT-UP COOKING
FEATURE
(Time in seconds)
60
180
288
390
510
150
210
270
ACTIVATING THE HEAT-UP FUNCTION
1 Choose power level
sensor button
of the power indicator will blink for 10
seconds.
2 Before 10 seconds have passed, choose
the power level (between
10 seconds, you will hear a sound and
the decimal point ( 8) will stay on,
which indicates that the automatic boost
fuction is activated . If the chosen level is
0 or 9, the heat up function will not be
activated.
Example:
You want to cook at power level 6 on a
hot-plate and you want to quickly heat up
the element at the beginning.
Choose power 9, touch sensor button
(5) again and the decimal point will blink.
Next, use sensor button
power level to 6. The system will keep the
heating element at power level
mum) for 150 seconds; after that time, the
system will automatically lower the power
6
level to .
MODIFYING
DURING THE HEAT-UP
With the heat-up function activated, press
sensor button
change the power level to the new value
chosen; however, if the new power level
chosen is 9, the function will be deactiva-
ted.
When increasing the power level using
sensor button
account the time passed up until that point.
36
9
and then touch
(5). The decimal point
1 8
and ). After
to lower the
9
THE POWER LEVEL
(5) and the system will
(5) the system takes into
(maxi-