Use And Maintenance - Teka TZ 3210 Einbauanleitung

Use and Maintenance

GB
Touch control user instructions
CONTROL PANEL ELEMENTS (see fig. 4)
1
On/off sensor button.
2
Indicators of the heating element.
Power and/or residual heat indicators.
3
Power reduction sensor button (less).
4
Power increase sensor button (more).
5
Locking sensor button (locks the rest of
6
the sensors, except on / off sensor).
7
Indicator light of the activated locking
8
Decimal point.
NOTE: * Only v�s�ble when dev�ce �s �n ope-
rat�on.
Act�ons are carr�ed out us�ng the sensor s
marked on the control panel. It �s not neces-
(TZ 3210)
sary put pressure on the glass; by simply
touching the sensor with your finger you will
activate the desired function.
Each action is confirmed with a beep.
The first time you connect the hob to the
electricity or if a power outage occurs, the
device will carry out a self-check and will
remain with the "lock activated" (indicator
light 7 on).
Press the locking sensor
indicator light turns off. The hob will beco-
me unlocked.
TURNING ON THE APPLIANCE
1 Touch the on sensor
one second.
The touch control panel will become acti-
vated and you will hear a beep. If a coo-
king zone is hot, the corresponding indica-
H
tor will show an
The next action must be taken within 10
seconds; otherwise, the touch control
panel will turn off automatically.
When the touch control panel is activated,
it can be disconnected at any time by tou-
34
(6) until the
(1) for at least
0
and a alternately.