Checking The Cable Laying - AL-KO ROBOLINHO 3000 Originalbetriebsanleitung

en
20.4 C h e c k in g th e c a b le la y in g
1. Place the Robolinho© 3000 about 1 metre in
front of the boundary cable.
2. Press the [HOME key], the Robolinho© 3000
moves along the boundary cable back towards
the base station.
3. In case of collisions or if the boundary cable is
laid too close, the Robolinho© 3000 will cancel
its movement.
4. Rectify the error, place the Robolinho© 3000
about 1 m in front of the boundary cable once
again and press the [HOME key] a second time.
P ressing the [HOME key] deactivates the
mowing day. Pressing the [START key]
activates the mowing day and starts the
mowing procedure.
20.4.1 If the error message
1. Unplug the transformer.
2. Repair cable.
3. Transformer reconnect to the power grid.
62
Original operating instructions
Robolinho© 3000