Melitta Caffeo Varianza CS Bedienungsanleitung Seite 76

Using the My Bean Select® function
30
Fig. 12: Removing the measuring spoon (Caffeo® Varianza® CS)
Requirement: The appliance is ready for operation.
1. Remove the measuring spoon (10) from the bean chute (30).
» The flashing display requests you to fill the bean chute.
2. Use the measuring spoon to fill a single portion of coffee beans into the
bean chute (30).
3. Place the measuring spoon back onto the bean chute.
» The lighting display indicates that the My Bean Select® function is
ready.
4. Prepare any coffee beverage.
Information
The measuring spoon is intended to help in filling the correct amount of
coffee beans into the bean chute.
ū A full measuring spoon contains approx. 10 to 11 g of coffee beans.
Depending on the desired coffee strength, fewer coffee beans can also
be filled.
ū If there are less than approx. 8 g coffee beans in the bean chute, the
My Bean Select® function is not activated. As soon as you hang up the
measuring spoon again, the display goes out. The next time a coffee is
dispensed, the coffee beans from the bean chute are mixed with the
coffee beans from the bean container.
76
10