Silvercrest SWKD 2400 A1 Bedienungsanleitung Und Sicherheitshinweise Seite 12

SilverCrest SWKD 2400 A1
 Ensure that the power cable (6) is not jammed or squashed.
 The device must always be disconnected from the mains if left
unattended, prior to assembly and disassembly or cleaning.
 Never remove the plug from the socket by pulling the power
cable (6); only ever pull the plug.
 If you find visible damage on the kettle or the power cable
(6), switch off the kettle immediately, remove the plug from
the socket and contact the service department (see
'Warranty information' section).
 Only plug the base (5) into a power socket that is properly
installed and easily accessible and whose mains voltage
corresponds with the rating plate specifications. Following
connection, the power socket must continue to be easily
accessible so that the plug can be quickly removed in an
emergency.
 Never immerse the base (5) in water or any other liquid. If
liquid enters into the base (5), remove the plug from the
socket and contact the service department (see 'Warranty
information' section).
10 - English