Angle Change Of Rear Handle - Makita HTR4900 Betriebsanleitung

ANGLE CHANGE OF REAR HANDLE

To permit vertical operation of the unit, the angle of the rear handle is designed to be changed.
How to change the angle
Return the throttle lever, and rotate the rear handle, pulling the rotation lock
pin.
Rotate the rear handle to the right or left by 90 degrees.
After rotation, release the lock pin. To secure the rear handle, hold the
rotation lock pin gently by the finger.
NOTE: For safety, the stopper works to catch the throttle lever during rotation
of the handle. Rotate the rear handle after complete rotation by 90
degrees.
Vertical operation
In rotating the rear handle to the right, hold the rear handle by the right hand,
and the front handle by the left hand. Perform cutting in a circle.
In rotating the rear handle to the left, hold the front handle by the right hand,
and the rear handle by the left hand. Perform cutting in a circle.
Rotation lock pin
12