Specifications - PeakTech 3434 Bedienungsanleitung


Opening the unit and maintenance and repair work must only be
carried out by qualified service technicians.

Do not make any technical changes to the device.

Measurement devices are no children's toys
Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available mild
household cleanser. Ensure that no water gets inside the equipment
to prevent possible shorts and damage to the equipment.
1. Introduction
This line finder is used to quickly track and identify mains-free cables
/ wires within a plant. Simply connect the generator to the cable to be
tracked and track it with the tip of the receiver. In addition, this device
is suitable for checking the operating status of telephone lines.
Properly used, this meter will perform its service reliably for many
years.
1.1 features

Detects and tracks individual wires or cables in wiring harnesses
without damaging the insulation

Volume / Sensitivity control with higher ambient noise level

Shows the signal status of telephone lines

Identifies tip / ring connection points

Continuity test with LED display

Battery life approx. 100 hours

2. Specifications

Voltage:
Signal:
Dimensions:
Weight:
9V Battery (Generator & Receiver)
1 kHz, 6 V Square (typical) or
continuous signal (switchable)
Receiver: 228x 57 x 25.4 mm
Generator: 58.5 x 58.5 x 34.3 mm
ca. 270 g
14