BTI PROFILINE -WKS 180 E Bedienungsanleitung Seite 23

Tool Specifications
Angle Grinder
Order number
Rated power
Output power
No-load speed
Grinding disc dia.
Reduced starting current
Run-on brake
Grinder spindle thread
Weight without cable, approx.
Protection class
Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be
affected. If the system impedance of the power supply is lower than 0.25 Ohm, disturbances are unlikely to occur.
Machine Elements
1 Thread for auxiliary handle (3x)
2 Spindle lock button
3 On/Off switch
4 Auxiliary handle
5 Grinder spindle
6 Protection guard
7 Clamping screw
8 Coded projection
9 Mounting flange
10 Grinding/cutting disc*
11 Clamping nut*
12 quick-clamping nut*
13 Guard, grinding cup*
14 Grinding cup*
15 Hand guard*
16 Spacers*
17 Rubber sanding pad*
18 Sanding disc*
19 Round nut*
20 Cup brush*
21 Diamond cutting disc*
22 Cutting guide with dust extraction
protection guard*
23 Handle unlocking button
24 Handle
* Not all of the accessories illustrated or described are
included as standard delivery.
BTI-WKS 180 E
015861
[W] 2 400
[W] 1 600
[rpm] 8 500
[mm] max. 180
•
–
M 14
[kg] 5.3
/ II
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 93 dB (A); sound
power level: 106 dB (A).
Wear hearing protection!
The typically weighted acceleration is 5.2 m/s
The machine is intended for cutting, roughing and
brushing metal and stone materials without using
water. For cutting stone, a cutting guide is re-
quired.
Slots in structural walls are subject to the Stand-
ard DIN 1053, Part 1 or country-specific regula-
tions.
These regulations are to be observed under all
circumstances. Before beginning work, consult
the responsible structural engineer, architects or
the construction supervisor.
English - 1
BTI-WKS 230 E
016312
2 400
1 600
6 500
max. 230
•
–
M 14
5.3
/ II
Noise/Vibration Information
Intended Use
Information on Structures
BTI-WKS 230 SE
015862
2 400
1 600
6 500
max. 230
•
•
M 14
5.3
/ II
2
.