English
No.
Designation
4.2.4.0
Remaining time
until pump kick
4.2.5.0
Mains On counter
4.2.6.0
Pump kick counter
4.3.0.0
States
4.3.1.0
Base-load pump
4.3.2.0
SSM
4.3.3.0
SBM
104
Type
Symbol Values/explanations
Time until the next pump kick
(after the pump has had a 24 h
standstill (e.g. via Extern off), it
will be automatically operated
for 5 seconds)
Number of switching-on
procedures of the supply voltage
(each occasion the supply
voltage is established after an
interruption is counted)
Number of pump kicks carried
out
The value display statically
shows the identity of the regular
base-load pump.
The units display statically
shows the identity of the
temporary base-load pump
ON
State of the SSM relay if a fault
message is present
OFF
State of the SSM relay if no fault
message is present
ON
State of the SBM relay if a
readiness/operation or mains On
signal is present
OFF
State of the SBM relay if no
readiness/operation or mains On
signal is present
SBM
Run signal
Display conditions
Only displayed if pump kick is
activated
Only displayed if pump kick is
activated
Only displayed for double
pump master
WILO SE 03/2018