Installation - Megasat 3600 V2 Bedienungsanleitung

4. Main Menu

4.2 Installation

1. Satellitenliste
Here you can select the satellite that should
be considered in the search process. Confirm
the respective satellite with the OK button.
The satellite will be marked with a check-
mark. The following options are also possible:
RED button (add):
GREEN button (edit):
YELLOW button (delete): Select a satellite with the pq buttons and then press the BLUE button.
BLUE button (search):
10
Here you can add a satellite. Assign a name and the longitude.
Here the name and longitude can be changed. Use the color buttons for
more options:
RED button: to switch between uppercase and lowercase.
GREEN button: to delete characters.
YELLOW button: to confirm editing.
BLUE button: to cancel.
The satellite you will delete is marked with an X symbol. After pressing
the EXIT button you will be asked if you want to delete the satellites.
Satellite: Select the satellite to be searched for.
Only FTA:
Select whether to search for all (including encrypted)
or only free-to-air programs.
Search channel: Select the desired search function. Either TV + radio,
only TV, or only radio programs.
Network search: Activate this option if there are new transponders that
have not yet been entered into the transponder list. The
network search can determine the frequency of new
transponders
transponders. The search process is faster than blind
scan, but there can still be missing stations.
ENGLISH
by analyzing data from known