Level Gauge; Mulch Kit; Lateral Grass Ejection; Filling With Engine Oil And Checking The Oil Level - Grizzly BRM 46-150 BSA InStart Originalbetriebsanleitung

Prior to using the collection box,
the mulch kit and lateral ejection
canal must be removed. (see
).
1. Lift up shock protection (18).
2. Hook the grass collection box
(23) into the mounting provided
for this (34) on the rear of the
equipment. .
3. Release the impact protection
(18). It holds the grass collec-
tion box in position.
Dismantling/Empty out the
Grass Collection Box:
4. Lift the impact protection (18)
and remove the grass collection
box (23).
5. Empty catchment basket (see
chapter „Disposal / Environmen-
tal Protection") and re-install it.

Level gauge

The level gauge (25) is located on the
side of the grass catcher (23). The aero-
dynamic air guidance provided by the flap
also optimises the filling.
Flap open:
grass catcher empty
Flap closed:
grass catcher full

Mulch kit

Prior to using the mulch kit, the
lateral ejection canal has to be
removed. (see
Attaching mulch kit
1. Remove the collection box
( 23), if used.
,

Lateral grass ejection

Filling with Engine Oil and
Checking the Oil Level
1. Unscrew the oil filler cap and dipstick
)
2. To check the oil level, wipe the dip-
2. Lift the impact protection (18).
3. Insert the mulch kit (29). The
red locking button clicks into
place.
Remove mulch kit
4. Lift the impact protection (18).
5. Insert the red locking button
downwards and remove the
mulch kit (29).
Before using the lateral grass
ejection, the mulch kit (
has to be inserted and the grass
collection box (
removed.
Install lateral ejection canal
1. Unlock the lateral impact
protection (16) by pulling the
locking lever (16a) upwards
and opening the lateral impact
protection (16).
2. Mount the lateral ejection chan-
nel (30) and remove the lateral
impact protection (16). It holds
the side ejection channel (30) in
position.
Place the equipment on a level
base.
( 17) and pour oil into the tank.
The oil tank holds 500 ml oil. Use
brand oil (e.g. SAE 30).
stick on a clean cloth and replace it in
the tank until it stops.
GB
29)
23) has to be
109