Commissioning, Operation; Packaging; Current Consumption - WIKA A2G-45 Betriebsanleitung

6. Commissioning, operation

5.2 Packaging

Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport
(e.g. change in installation site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage
Storage temperature: -20 ... +70 °C
Protect the instruments from moisture and dust.
6. Commissioning, operation
Installation
When connecting the instrument, the process lines must be free of
■
pressure.
Observe the suitability of the instrument for the media to be
■
measured
Observe maximum pressures
■
Electrical connection
The instruments are designed to operate with safety extra-low voltage
(SELV). When wiring up the instruments, the technical specifications
for those instruments should be followed. In the case of a sensor with
transmitter, as a rule, the transmitter should be operated in the middle of
the measuring range, since deviations can occur at the range limits.
The ambient temperature of the transmitter electronics
■
should be kept constant.
Current/voltage spikes from switching the power supply
■
on or off must be prevented by the customer.

Current consumption

35 mA + switch (7 mA each) + instrument with automatic zero
adjustment (20 mA)
0 ... 10 V output (10 mA), max. 80 mA
WIKA operating instructions air2guide model A2G-45
GB
9