Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GCL Professional 2-50 C Originalbetriebsanleitung

20 | English
 Caution! When using the measuring tool with
Bluetooth®, interference with other devices and sys-
tems, airplanes and medical devices (e.g., cardiac
pacemakers, hearing aids) may occur. Also, the possi-
bility of humans and animals in direct vicinity being
harmed cannot be completely excluded. Do not use the
measuring tool with Bluetooth® in the vicinity of medi-
cal devices, petrol stations, chemical plants, areas
where there is danger of explosion, and areas subject
to blasting. Do not use the measuring tool with Blue-
tooth® in airplanes. Avoid operation in direct vicinity of
the body over longer periods.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cence.
Product Description and
Specifications
Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.

Intended Use

The measuring tool is intended for determining and checking
horizontal and vertical lines as well as plumb points.
You can use the rotating mount RM 2 to rotate the measuring
tool 360° around a central, always visible plumb point. This
enables you to align the laser lines precisely, without having
to change the position of the measuring tool.

Product Features

The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 Exit opening for laser beam
2 Indicator for Bluetooth® connection

Technical Data

Point and line laser
Article number
1)
Working range
– Standard laser lines
– with laser receiver
– Upward laser point
– Downward laser point
Levelling accuracy
– Laser lines
– Laser points
1) The working range can be decreased by unfavourable environmental conditions (e.g. direct sun irradiation).
2) Shorter operating times in Bluetooth® operation and/or in conjunction with RM 3.
3) For Bluetooth® low energy devices, establishing a connection may not be possible, depending on model and operating system. Bluetooth® devices
must support the SPP profile.
Technical data determined with battery from delivery scope.
The measuring tool can be clearly identified with the serial number 15 on the type plate.
1 609 92A 2U5 | (27.2.17)
3 Bluetooth® button
4 Charging condition of battery pack/batteries
5 Working without automatic levelling indicator
6 Receiver mode button
7 Receiver mode indicator
8 Button for laser operating mode
9 Battery pack*
10 Battery adapter cover*
11 Batteries*
12 Unlocking button for battery pack/battery adapter/
battery lid*
13 Battery adapter sealing cap*
14 Laser warning label
15 Serial number
16 Tripod mount 1/4"
17 Guide groove
18 On/Off switch
19 Guide rail
20 Magnets
21 Fastening slot
22 Rotating mount (RM 2)*
23 Fine adjustment knob of rotating platform
24 Ceiling clip (BM 3)*
25 Universal holder (BM 1)*
26 Rotating platform (RM 3)*
27 Laser viewing glasses*
28 Protective pouch*
29 Telescopic rod (BT 350)*
30 Tripod (BT 150)*
31 Inlay*
32 Case*
33 Laser receiver*
34 Laser target plate
* The accessories illustrated or described are not included as
standard delivery.
GCL 2-50 C
3 601 K66 G..
20 m
5–50 m
10 m
10 m
±0.3 mm/m
±0.7 mm/m
GCL 2-50 CG
3 601 K66 H..
20 m
5–50 m
10 m
10 m
±0.3 mm/m
±0.7 mm/m
Bosch Power Tools