Miele CarClean Set Plus Bedienungsanleitung Seite 60

U
CarClean Set Plus
(see illustrations pages 2, 4, 5)
The accessories in the Miele CarClean
Set Plus should only be used with Miele
vacuum cleaner models S 227 - S 658.
If your vacuum cleaner is not provided
with the connector A, you can only use
the CarClean Set hose with the
attached connector B.
^ Attach the CarClean Set hose to con-
nector B so it clicks into place. The
release buttons at the connector and
the latch ring must align.
CarClean Set Vario
(see illustrations pages 3 and 5)
The Miele-CarClean Set Vario has been
designed as an accessory for
non-Miele canister vacuum cleaners.
The enclosed adapter f is required for
connecting the accessories to
non-Miele canister vacuum cleaners.
60
Accessories
a Micro hose with combination nozzle
(crevice nozzle and dusting brush)
b Hand Turbobrush
c Crevice nozzle
d+ e Suction hose
with hose holder and connection
(only with the CarClean Set Plus)
f Accessory adapter
(only with the CarClean Set Vario)
Connecting the suction hose d
^ Fit the latch ring or the connector into
the suction socket on your vacuum
cleaner (illustration g or i).
To disconnect the hose from the
vacuum cleaner
^ Press the release button (illustration
h or j) and pull the latch ring or
connector out of the suction socket.
Important note for Miele vacuum
cleaner models S 356i / S 456i
^ Plug the adapter into the notch of the
connection of the suction hose. Insert
the connector into the suction socket
(illustration k).
Hose holder
The suction hose holder e can be
mounted on the wall (illustration l) with
the supplied screws and anchors.