Control panel locking
To avoid modifying a setting of cooking zones , in particular with within the framework of cleaning the
control panel can be locked (with exception to the On/Off key [
• Locking :
Action
Start
Hob locking
• Unlocking :
Action
Start
In the 5 seconds after start :
Unlocking the hob
Power Management
The hob is equipped with a power limitation. If you reach the maximum power it will be impossible to
increase the power on the different cooking zones and a beep signal will sound. This limitation is set
at 7400 W by the factory but it is possible to change it to 3000 W, 5600 W or 7400 W.
Power limitation configuration
Before beginning the procedure:
• Make sure there is no more pot on the hob
• Disconnect the appliance from the grid by removing the fuse or turning the circuit breaker off.
• Reconnect the table to the grid
• Start the procedure within 2 minutes after reconnecting the hob to the grid
• Make sure all cooking zones are off.
Procedure:
To set the power limitation, you must:
1) Press simultaneously the two key of the
bottom zones during 3 seconds. A beep
will sound and the current power is
displayed.
2) To set the power limitation use the [ + ] and [ - ]. To exit the procedure without saving your
changes, don't touch any key for 60 seconds.
3) To save the new power limitation, re-press the two key of the bottom zones during 3 seconds.
Once the new limitation registered, a beep will sound.
Control panel
Press key [
]
Press simultaneously [ - ] and [
Repress selection key from
the front right zone
Control panel
Press key [
]
Press simultaneously [ - ] and
[
] from the front right zone
Repress key [ - ]
28
]).
Display
[ 0 ] or [ H ]
]
No modification
[ L ]
Display
[ L ]
[ 0 ]
No light on the displays