Focus Specifications - AirSep Focus Gebrauchsanweisung Für Patienten

GB

Focus Specifications

Oxygen Concentration:*
Dimensions:
Weight:
Power:
Battery duration
(Rechargeable
lithium Battery)
Battery recharge time:
Warm-up time:
Battery cycle life:
Audible alarms and pulse visual
indicators:
Temperature range:
* Based on an atmospheric pressure of 14.7 psi (101 kPa) at 21°C
* Operating unit outside normal operational temperature range can affect performance.
GB-31
Pulse setting equivalent to a continuous flow of
90% oxygen - 3% / +5.5%
16.4 cm high x 12.2 cm wide x 6.1 cm deep
(6.4 in. high x 4.8 in. wide x 2.5 in. deep)
Concentrator 0.8 kg (1.75 lb)
Battery 0.2 kg (0.53 lb)
Optional AirBelt Battery 0.8 kg (1.8 lb)
Universal Power Supply:
AC Power Supply: Input # 1_100 – 240 VAC
(1.5 Amps max at 120 VAC 50/60 Hz)
DC Power Supply: Input # 2_11-16 VDC
5.0 Amps max
Battery: 1½ hours (per battery)
Optional AirBelt Battery: 4 hours
4 hours; optional AirBelt: 3½ hours
2 minutes
Approximately 300 cycles, then 80% capacity
or below.
Start-up – audible and visual
Pulse flow – visual
Cannula disconnect – audible and visual
Breath rate alarm – audible and visual
General malfunction – audible and visual
Service required – visual
Low battery – udible and visual
Battery condition – battery level indicator on
battery
Normal operating temperature: 5°C to 40°C
Storage temperature:
Focus™
-20°C to 60°C
®
AirSep Corporation
MN172-1 rev. - 03/11