Technical Specification - Elcometer MTG4 Bedienungsanleitung

12 SPARES & ACCESSORIES (continued)
12.4 TRANSDUCER ADAPTOR
This adaptor allows dual element,
'non-intelligent' transducers from
Elcometer - see Section 12.1
'Transducers' on page en-11 - and other
manufacturers' transducers with Lemo
connectors, to be used with the MTG
product range.
Simply plug the adaptor into the transducer connection point at the
base of the gauge to connect any 'non-intelligent', dual element
transducer and follow the on-screen instructions.
Description
Transducer Adaptor

13 TECHNICAL SPECIFICATION

Model
Pulsed
Echo
Thickness
a
Range
Echo-Echo
ThruPaint™
Pulsed
Echo
Accuracy
Echo-Echo
ThruPaint™
Velocity Range
Resolution
Measurement Rate
Operating Temperature
Power Supply
a
Thickness range is dependent on the material being measured and the transducer used.
en-15
R
0.63 - 19.99mm: ±0.1mm; 20 - 500mm: ±0.5%
(0.025 - 0.787": ±0.004"; 0.788 - 20": ±0.5%)
MTG2
0.63 - 500mm (0.025 - 19.999")
-
-
1250 - 10,000m/s (0.0492 - 0.3937in/µs)
0.1mm (0.01")
4 Hz (4 readings per second)
-10 to 50°C (14 to 122°F)
2 x AA batteries
Sales Part Number
T92024911
MTG4
2.54 - 20mm
(0.100 - 0.787")
±0.1mm (±0.004")
www.elcometer.com