Communication Settings - Hitachi CP-X8160 Benutzerhandbuch

Network Bridge Communication

Communication settings

For communication setting, use the COMMUNICATION menu in the OPTION -
SERVICE menu
Item
BAUD RATE
Data length
PARITY
Start bit
Stop bit
Transmission method
NOTE • For connecting the projector to your devices, please read the
manual for each devices, and connect them correctly with suitable cables.
• Turn off the power and unplug both the projector and other devices before
connecting them.
• For details of Transmission method, refer to 6.4 Transmission method in the
Network Guide.
18
4800bps / 9600bps / 19200bps / 38400bps
8 bit ( xed)
NONE/ODD/EVEN
1 bit ( xed)
1 bit ( xed)
HALF-DUPLEX/FULL-DUPLEX
Condition