Hitachi CP-X8160 Benutzerhandbuch Seite 242

Connection to the ports
Connection to the ports
NOTICE
Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
Only the signal that is input from the COMPUTER IN1 or IN2 can be output
from the MONITOR OUT port.
A COMPUTER IN1,
D-sub 15pin mini shrink jack
<Computer signal>
• Video signal: RGB separate, Analog, 0.7Vp-p, 75 terminated (positive)
• H/V. sync. signal: TTL level (positive/negative)
• Composite sync. signal: TTL level
<Component video signal>
• Video signal: Y with composite sync, Analog, 1.0±0.1Vp-p, 75 terminated
Cb/Pb, Analog, 0.7±0.1Vp-p, 75 terminated
Cr/Pr, Analog, 0.7±0.1Vp-p 75 terminated
• System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60
Pin
1
Video Red, Cr/Pr
2
Video Green, Y
3
Video Blue, Cb/Pb
4
(No connection)
5 Ground
6
Ground Red, Ground Cr/Pr
7
Ground Green, Ground Y
8
Ground Blue, Ground Cb/Pb
4
B MONITOR OUT
Signal
Pin
9
(No connection)
10 Ground
11
(No connection)
A : SDA (DDC data) B : (No connection)
12
13 H. sync / Composite sync.
14 V. sync.
A : SCL (DDC clock) B : (No connection)
15
A
B
⑪ ⑫ ⑬ ⑭ ⑮
⑥ ⑦ ⑧ ⑨ ⑩
① ② ③ ④ ⑤
Signal