Symbols Used; Correct Use; Scope Of Delivery - Gemü 205 Original Einbau- Und Montageanleitung

2.3

Symbols used

Danger - hot surfaces!
Danger - high voltage!
Hand: indicates general
information and recommendations.
Bullet point: indicates the tasks to
G
be performed.
Arrow: indicates the response(s) to
®
tasks.
Enumeration sign

3

Correct use

Use the solenoid valves only for the
intended purpose!
Otherwise the manufacturer liability and
®
guarantee will be void.
The solenoid valve to be used
G
exclusively within permissible
limits and in consideration of these
installation, operating and maintenance
instructions. Any other use is to be
considered not as intended.
The solenoid valve is not approved for
G
explosion endangered areas.
The GEMÜ 205 solenoid valve must
only be used for the control of media

which do not attack, chemically or
mechanically, the materials used,
be operated above freezing point with

freezable media,
only be used within the performance

limits (see chapter 5 "Technical data" and
the details in the data sheet),
not be modifi ed from a constructional

point of view.
The component must be installed
in accordance with the EMC
requirement for the plant.
4

Scope of delivery

The following is included in the scope of
delivery:
Solenoid valve with solenoid coil

Connector plug

Installation, operating and maintenance

instructions
19 / 32
WARNING
205