Operating The Receiver Using The Voice Commands; Basic Procedure - JVC KD-LX50R Bedienungsanleitung

STOP
PLAY

Operating the receiver using the voice commands

Basic Procedure

1
2
3
Speak one of the voice commands to the microphone while
"SPEAK" is flashing on the display.
If your voice cannot be recognized
The unit will ask you to speak again (and more) until "V.COMMAND" disappears from the
display.
If your voice command cannot be carried out and "V.COMMAND" disappears, repeat from
step 2.
42
1,2
4
ATT/STR*
Voice remote
Turn on the power.
The display illuminates and the control panel comes out.
Activate the Voice Recognition System.
"SPEAK" starts flashing on the display after the voice navigation "Please
speak now" (or a beep).
The receiver performs what you command it to do. (Ex. when
you speak "Jazz 89.")
* ATT stands for "attenuator,"
and STR stands for "store."