Peg Perego Ypsi Bassinet Gebrauchsanleitung Seite 16

the Ypsi Bassinet.
• This product is designed to hold
a sleeping baby. Once the baby is
asleep, the bassinet's backrest should
be lowered completely.
• Before unfastening and lifting the
bassinet from the frame, adjust the
backrest to its lowest position
• Do not add or use mattresses
different from the original one.
COMBINED WITH CHASSIS:
• This product is compatible with
the following original Peg-Perego
products: Ypsi Chassis.
• WARNING: make sure that all the
attachment devices of the Ypsi Bassinet
are correctly fixed before using.
• WARNING: never leave the child
unattended.
COMBINED WITH STAND:
• WARNING: This product is compatible
with the following original Peg-
Perego products: Home Stand.
• WARNING: Do not use if any part of
the stand is broken, torn or missing.
• WARNING: Do not let other children
play unattended near the carry cot
and stand.
The images referring to the textile details may
differ from the collection purchased.
For more information, consult our website:
www.pegperego.com
Instructions for use
1 Rotate the handle bar of the Ypsi Bassinet upwards, until
you hear "click".
2 Remove the foot muff and the mattress.
3 Rotate the metal rod on the head side upwards (fig_a) and
lift the backrest as shown in the picture (fig_b).
4 Rotate the metal rod again, downwards, (fig_a) and use the
latch to fasten it to the hooks (fig_b).
5 Insert, into the slot, the end of the belt that adjusts the
position of the backrest.
6 Lift the backrest (fig_a) and, using the latch, place the
metal rod near the hooks (fig_b), then fasten it (fig_c).
7 Lower the seat and fasten the two zips on the side of the
bassinet.
8 Insert the mattress, making sure the opening of the case is
facing down and not up, in contact with the child.
9 HOOD: lower the back of the hood (fig_a) and close the zip
(fig_b). It is also possible to draw out a section of fabric from
the hood to protect the child from sunlight (fig_c) and easily
slip it back into the hood when it is no longer necessary.
10 FOOT MUFF: position the foot muff on the Ypsi Bassinet
and fasten it to the padding with the zip, as shown in the
picture.
11 The Velcro straps can be used to fasten the foot muff
to the hood, guaranteeing the child is better protected
against the elements. Lift the edge of the foot muff (fig_a),
turn it upwards (fig_b) and fasten it to the hood using the
Velcro straps (fig_c).
12 The foot muff's turn-up is divided into two separate parts.
Undo the button and lower a flap for easy inspection.
13 HANDLE BAR: the handle bar is locked only if in the vertical
16