Get Started - Silk'n SatinGlow H3301 Bedienungsanleitung

9.

Get started!

EN
1. Remove the Silk' n SatinGlow hair removal unit and other components from box.
2. Verify that the disposable lamp cartridge is inserted properly at the tip of the device
and that it is not damaged.
3. Plug the adapter cord into the Silk' n SatinGlow hair removal unit socket.
4. Plug the adapter into an electrical outlet. The standby indicator light will turn on.
Your Silk' n SatinGlow is now ready to start.
E
Treat with Silk' n SatinGlow safely and properly!
J
Choose areas to treat that have not had recent exposure to the sun.
5. The skin of the treatment areas should be shaved, clean, dry and free of any powders,
antiperspirants or deodorants. Do not wax, pluck or tweeze the hair out. Shaving
is an important step to get the results you want!
6. Press the On/Stdby button. The power on indicator light (orange) will turn on and a fan
sound (similar to the sound of a hairdryer) will start.
7. Approximately 3.5 seconds after pressing the On/Stdby button, the ready indicator light
(green) will turn on. The device is then ready for you to trigger the first pulse at the
lowest energy level.
16