Herunterladen Diese Seite drucken

Beta 2009 RE 125 CC ENDURO Bedienungsanleitung Seite 13

Werbung

Procedura d'impostazione dell'orologio
1
1°- Premere MODE fino al lampeggio
dei numeri relativi alle ore.
2°- Rilasciandolo e ripremendolo: le
ore avanzano di un numero. Man-
tenendolo premuto avanzano
automaticamente. Lasciandolo
inattivo si passa al punto 4°.
3°-Rilasciare il pulsante MODE a ore
raggiunte.
4°-Dopo 2" lampeggiano i minuti.
5°-Operare come al punto 2°. La-
sciando MODE inattivo si passa
al punto 6°.
6°-Rilasciare il pulsante MODE a mi-
nuti raggiunti e dopo 2" l'orario
verrà assunto.
12
Fig. 4
Clock setting procedure
1. Press the MODE button until the
hour digits start blinking.
2. Releasing the button and then
pressing it again increases the
hours by one unit. Holding down
the button causes the figures to
change rapidly. Leaving the but-
ton inactive skips to step 4.
3. Release the MODE button when
the correct hour setting has been
obtained.
4. After 2 seconds the minute digits
start blinking.
5. Repeat the procedure described
at step 2. Leaving the MODE but-
ton inactive skips to step 6.
6. Release the MODE button when
the correct minute setting has
been obtained.

Werbung

loading