Additional Base Stations; Selecting A Base Station - switel DC42 Bedienungsanleitung

11.5

Additional base stations

The range of the handset can be increased by using several base stations. To implement the func-
tion, all the base stations must be connected to a telephone line connection. Depending on the
intended use, each base station can be assigned the same telephone number or each can be as-
signed a different call number. Pay attention that all the base stations overlap with regard to their
range.
The handset must be registered on each base station.
Please test the range of the handset before starting up a new base station. If a handset is registe-
red on the base station and the automatic base station dialling function has been activated on the
handset (refer to Section 7.6), the handset is always automatically transferred to the next base
station.

11.5.1 Selecting a base station

, y or z, 
y or z, 
All the base stations to which the handset is already registered appear in the display.
The number of the base station currently active flashes.
ë, 
Or:
y or z Auto , 
92
− Multiple Handsets −
Open the Register
Select the Select Base
Enter the internal number of the base station to which the
handset should switch and confirm the input. {í}
This option causes the handset to switch to the next base
station automatically when the connection to the current
base station is interrupted.
menu
function and confirm