Deregistering Handsets; Additional Base Stations; Selecting A Base Station - switel DE114 Bedienungsanleitung

11.4.3 Deregistering handsets

A handset can only be deregistered by another handset still registered. It is not possible
to complete the deregistration using the handset which is to be deregistered.
zz
yz
ë
Press the — button to cancel the process.
ë
11.5

Additional base stations

The range of the handsets can be increased by using several base stations. To imple-
ment the function, all the base stations must be connected to a telephone line connec-
tion. Depending on the intended use, each base station can be assigned the same tele-
phone number or each can be assigned a different call number. Pay attention that all the
base stations overlap with regard to their range.
The handset must be registered on each base station.
Please test the range of the handset before starting up a new base station. If a handset
is registered on the base station and the automatic base station dialling function has been
activated on the handset (refer to Section 7.5), the handset is always automatically trans-
ferred to the next base station.

11.5.1 Selecting a base station

y
yz
All the base stations to which the handset is already registered appear in the
display. The number of the base station currently active flashes.
ë
Or:
z AUTO 
106
− Multiple Handsets −
Open the SETUP menu.
Select the DEL HANDSET function and confirm.
Enter the PIN (default setting: 0000) and confirm
the input {í}
Enter the internal call number of the handset to be
deregistered and confirm the input. {í}
Open the REGISTER menu
Select the SELECT BASE function and confirm
Enter the internal number of the base station to
which the handset should switch and confirm the
input. {í}
This option causes the handset to switch to the
next base station automatically when the
connection to the current base station is
interrupted.