Mixing Shakes, Cocktails Or Other Liquids; End Of Operation; Working With The Mincer; Setting Up The Mincer To Mince Meat - Medion MD 16480 Bedienungsanleitung

7.5. Mixing shakes, cocktails or other liquids

To mix shakes, cocktails and other liquids, use the whisk.
− Mix the ingredients in accordance with the required recipe for some 3 to 5 minutes at a speed setting of
1 to 8.
Do not exceed the maximum quantity in the mixing bowl.
Do not use the whisk for longer than 5 minutes and then allow a pause of at least 10 minutes.

8. End of operation

1. Switch off the appliance.
2. Disconnect the mains plug.
3. Press down on the tilt lever to allow the arm to raise itself.
4. Remove the mixing tool. To release the tool, rotate it anticlockwise.
5. Rotate the mixing bowl slightly clockwise to remove it.
6. When the dough is ready, use a spatula to remove it from the mixing bowl.
7. Clean the parts used as described under "Cleaning".

9. Working with the mincer

DANGER!
Risk of injury by rotating and moving parts
− When using the mincer, put the mixing bowl in position to protect the rotating fitting for
the mixing tool. There is a risk of a crushing injury!

9.1. Setting up the mincer to mince meat

4
For mincing, use the most appropriate of the three meat cutting discs for the desired result together with the
meat cutter.
1. Pull out the mains plug to isolate the machine from the supply.
2. Hold in the knob to release the front cover and turn the front cover to the right to release.
7 12 13
14
DE
FR
EN
NL
57 of 86