Südwind AMBIENTIKA SOLO Handbuch Für Installation Und Wartung Seite 110

Remote control can´t be
connected to devices.
Remote control can´t be
connected to devices.
Remote control does not
react to finger pressure
Device is off, suddenly starts
on maximum speed for
some time and turns off
again.
In the evening device
reduces speed and increases
speed during the day.
110
RESET both devices and reprogram. Make sure to set Master first.
• Ensure the remote control is linked to the devices correctly.
• Start with RESET. Make sure to switch on remote control
first, then turn on devices in correct order.
• Ensure the remote control is linked to the devices correctly.
• Start with RESET. Make sure to switch on remote control
first, then turn on devices in correct order.
• Press different areas lightly.
• Press button ______ for a few seconds.
• Start devices´ RESET. Make sure to switch on remote control
first, the turn on devices in correct order.
Device is set on monitoring mode.
Device is on AUTO mode and adapts speed to light intensity
(twilight).