Operator Instructions - MIRKA CEROS Betriebsanleitung

150 mm (6 in.), 125mm (5 in.) & 77 mm (3 in.) 10,000 RPM Electrical Random Orbital Sander
150 mm (6 in.), 125mm (5 in.) & 77 mm (3") 10,000 RPM Electrical Random Orbital Sander (See "Product Configuration/Specif
for particular Model) to which this declaration relates is in conformity with the following standard(s)
particular Model) to which this declaration relates is in conformity with the following standard(s) or other normative
or other normativedocument(s) EN ISO, EN 60 745, EN 55 014, EN 61 000 in accordance with the
Jeppo 1.10.2012
Jeppo 1.12.2008
_____________________
Place and Date of issue

Operator Instructions

Includes – Warranty, Please Read and Comply, Proper Use of
Tool, Work Stations, Putting the Tool Into Service, Operating
Instructions, Product Configuration/Specifications Tables,
Parts Page, Parts List, Sander Spare Parts Kits, Trouble
Shooting Guide, Service Instructions
Manufacturer/Supplier
KWH Mirka Ltd.
66850 Jeppo, Finland
Tel: + 358 20 760 2111
Fax: +358 20 760 2290
The warranty terms are as follows:
- 12 months on KWH MIRKA electrical tools.
The warranty period commences at the date of purchase. The warranty only covers imputable material and manufacturing
defects.
Parts replacement or repair during the warranty period is free of charge if carried out by an official KWH MIRKA service center.
Freight costs are always to be paid by the purchaser.
The warranty does not include:
Normal wear and tear i.e.
- Bearings, backing pad, shroud
- Industrial continuous usage
Overloading or improper use i.e.
- Dropping the tool in water
- Damage caused by misuse
- Damage caused by anything other than defects in material and workmanship
- Dropping or other excessive impact
Normal maintenance and service that can be carried out by the operator :
- Changing of the packing pad
- Changing of the spindle bearing
- Changing of the exhaust fitting
- Changing of the shroud
NB! All other service operations must be carried out by an authorized Mirka service center.
The warranty only covers the local repair, not the tool replacement.
Compensation for downtime and loss of production are explicitly not included in the warranty.
Declaration of conformity
KWH Mirka Ltd.
KWH Mirka Ltd.
66850 Jeppo, Finland
66850 Jeppo, Finland
declare on our sole responsibility that the product
declare on our sole responsibility that the product
(See "Product Configuration/Specifications" Table
for
document(s) EN ISO
regulations 2006/42/EC , 2004/108/EC.
EN 60 745, EN 55 014, EN 61 000 in accordance with the
regulations 2006/42/EC , 2004/108/EC.
____________________________
Name
Required Personal Safety Equipment
Safety Glasses Breathing Masks
Safety Gloves Ear Protection
Warranty
6
7
____________________________
Ralf Karlström, President and CEO
Tom Nordström Vice President
Important
Read these instructions
carefully before installing,
operating, servicing or
repairing this tool.
Keep these instructions in a
safe accessible location.
Input Voltage
90-240 VAC